Filter
Top Products
7.
Figure 22
Note: Refer to Control Panel on Page 24 for
additional details.
Figure 21.
Continuous operation of this mill without
properly and successfully completing all
procedures of the Test Run could lead to
personal injury or machine damage, and
could void the warranty.
To test run the machine:
1.
2.
3. Lubrication
Page 38
4. Coolant
Reservoir Page 40
5.
6.
ONFigure
21
Note: The cooling fans on the back of the
drive system and electrical cabinet should
start.
8.
9.
Note: Moving the spindle direction switch to
the center or neutral position stops spindle
rotation.
Figure 22.