Filter
Top Products
12.
Note: For the V-belt and the flat belt, the
proper amount of tension is reached when
the belt deflects approximately
1
⁄2" with mod-
erate pressure applied midway between the
pulleys, as shown in Figure 18.
Motor
Pulley
Approx.
1
/
2
"
Deflection
Spindle
Pulley
Figure 18.
13.
Step 3
The belt and pulleys represent serious
entanglement hazards! ALWAYS make sure
the belt guard is properly installed before
connecting the grinder to power.
External Wheel
Note: To install the external wheel, you perform
similar steps when installing the internal wheel.
Use the photos in the previous Internal Wheel
subsection beginning on Page 16 for visual refer-
ence.
Tools Needed Qty
Removing Internal Wheel
1.
2.
3.
Figure11
Note: If necessary, also use a wrench on the
flats of the internal wheel shaft to loosen it.
4.
14.