Grizzly G1023Z Saw User Manual


 
G1023Z Series Heavy-Duty 10'' Table Saw -17-
Clean Up Site Considerations
Unsupervised children
and visitors entering a
shop could receive seri-
ous personal injury.
Ensure child and visitors
safety by keeping all
entrances to the shop
locked at all times. DO
NOT allow unsupervised
children or visitors in the
shop at any time.
The unpainted surfaces are coated with a waxy
oil to protect them from corrosion during ship-
ment. Remove this waxy oil with a solvent clean-
er or citrus-based degreaser such as Grizzly’s
G7895 Degreaser. To clean thoroughly, some
parts may need to be removed. The machine
will operate best when the waxy oil is
removed from all moving and sliding parts.
Chlorine-based cleaners and solvents will dam-
age the painted surfaces of the machine. Follow
the manufacturer’s instructions when using any
type of cleaning product.
Gasoline or petroleum
products used to clean
the machinery could
explode causing serious
personal injury. DO NOT
use gasoline or petrole-
um products to clean the
machinery.
Smoking near solvents
could ignite an explosion
or fire causing serious
injury. DO NOT smoke
while using solvents.
Lack of ventilation while
using solvents could
cause serious personal
health risks, fire, or
environmental hazards.
Always work in a well
ventilated areas to pre-
vent the accumulation
of dangerous fumes.
Supply the work area
with a constant supply
of fresh air using a fan.
Floor Load
The Model G1023Z Series Table Saws are a
heavy load with a medium footprint. Most com-
mercial or home shop floors should be sufficient
to carry the weight of the machine. Reinforce the
floor if you question its ability to support the
weight.
Working Clearance
Working clearances can be thought of as the dis-
tances between machines and obstacles that
allow safe operation of every machine without lim-
itation. Consider existing and anticipated machine
needs, size of material to be processed through
each machine, and space for auxiliary stands or
work tables. Also, consider the relative position of
each machine to one another for efficient materi-
al handling. Be sure to allow yourself sufficient
room to safely run your machines in any foresee-
able operation and keep dust collection hoses off
the floor and out of the way.
Lighting
Lighting should be bright enough to eliminate
shadows and prevent eye strain. Electrical circuits
should be dedicated or large enough to handle
combined motor amp loads. Be sure to follow
local electrical codes for proper installation of new
lighting or circuits.