Filter
Top Products
-8- G8220 Wet/Dry Bench Grinder
Site Considerations
Notes
BENCH MOUNTING
Your G8220 Wet/Dry Grinder is designed to be
used on a workbench. Make sure it is positioned
at a comfortable working height. The machine
can be permanently mounted to a bench by
removing the base and using the four holes in the
motor body to secure it directly to the surface of
a bench.
WORKING CLEARANCES
Working clearances can be thought of as the dis-
tances between machines and obstacles that
allow safe operation of every machine without
limitation. Ensure that your working area offers
plenty of room for free movement and a substan-
tial amount of distance between you and others
that may be working in your shop space.
LIGHTING AND OUTLETS
Lighting should be bright enough to eliminate
shadow and prevent eye strain. Electrical circuits
should be dedicated or large enough to handle
combined motor amp loads. Outlets should be
located near each machine so power or exten-
sion cords are not obstructing high-traffic areas.
Be sure to observe local electrical codes for prop-
er installation of new lighting, outlets, or circuits.
Make your shop “child safe”. Ensure that
your workplace is inaccessible to young-
sters by closing and locking all entrances
when you are away. Never allow visitors in
your shop when assembling, adjusting or
operating equipment.