Filter
Top Products
-14-
Model G8688 (Mfg. 3/09+)
The lathe should be mounted or placed on a
strong well lit workbench of sufficient height so
that you do not need to bend your back to per-
form normal operations.
To bolt the lathe to your workbench:
1. Remove the four M6-1 screws that secure the
rubber feet and chip tray to the machine (if
already fitted.)
2. Use the diagram shown in Figure 7 as a
drill pattern to drill your holes into your work-
bench.
The rubber feet are attached to two metal brack-
ets. The feet and the brackets bolt through the
chip tray and into the base of the lathe.
To attach the rubber feet:
1. Remove the four Phillips head screws from
the bottom of the chip tray.
2. Attach the two brackets with the screws you
removed in Step 1 (see Figure 8).
Figure 8. Installing the feet.
Moving & Placing
Mini Lathe
The Model G8688 is a
heavy machine. DO NOT
over-exert yourself while
unpacking or moving
your machine—get assis-
tance.
3. Use the appropriate length M6-1 bolts with a
flat washer to secure the lathe and chip tray
to the workbench.
Figure 7. G8688 drill pattern.
72mm
475mm
5
⁄16"