Filter
Top Products
-24-
G8976 3 Wheel 12" Bandsaw
To avoid serious personal injury, read and
become familiar with the entire instruction
manual before using the Model G8976.
Damage to your eyes, lungs, and ears
could result from failure to wear safety
glasses, a dust mask, and hearing protec-
tion while sanding with this machine.
Loose hair and clothing
could get caught in
machinery and cause
serious personal injury.
Keep loose clothing
rolled up and long hair
tied up and away from
machinery.
Your safety is important! Please follow the
warnings below during this entire section:
The guide post moves the upper blade guide
assembly up and down. The guide post/upper
blade guide assembly is set correctly when the
bottom edge of the guide bearings are approxi-
mately
1
⁄4" above the top surface of the workpiece
being cut.
To adjust the guide post:
1. Disconnect the machine from the power
source!
2. Loosen the guide post knob bolt shown in
Figure 28.
3. Slide the guide post/upper blade guide
assembly to approximately
1
⁄4" above the top
surface of the workpiece.
4. Tighten the guide post knob bolt.
Figure 28. Release the guide post knob bolt
before adjusting the guide post/upper
blade guide assembly.
Guide Post
Knob Bolt
Operation Safety Guide Post
SECTION 6: OPERATIONS