Filter
Top Products
Model G8993 4" Tile Saw-2-
7. ONLY ALLOW TRAINED AND
PROPERLY SUPERVISED PER
-
SONNEL TO OPERATE MACHIN
-
ERY. Make sure operation instruc-
tions are safe and clearly under
-
stood.
8. KEEP CHILDREN AND VISITORS
AWAY. Keep all children and visi-
tors a safe distance from the work
area.
9. MAKE WORKSHOP CHILD
PROOF. Use padlocks, master
switches, and remove switch keys.
10. NEVER LEAVE WHEN MACHINE
IS RUNNING.
Turn power OFF
and allow all moving parts to come
to a complete stop before leaving
machine unattended.
11. DO NOT USE IN DANGEROUS
ENVIRONMENTS. DO NOT use
machinery in damp, wet locations,
or where any flammable or noxious
fumes may exist.
12. KEEP WORK AREA CLEAN AND
WELL LIT. Clutter and dark shad
-
ows may cause accidents.
13. USE A GROUNDED EXTENSION
CORD RATED FOR THE MACHINE
AMPERAGE. Undersized cords
overheat and lose power. Replace
extension cords if they become
damaged. DO NOT use extension
cords for 220V machinery.
14.
ALWAYS DISCONNECT FROM
POWER SOURCE BEFORE
SERVICING MACHINERY. Make
sure switch is in
OFF
position before
reconnecting.
15. MAINTAIN MACHINERY WITH
CARE. Keep blades sharp and
clean for best and safest perfor
-
mance. Follow instructions for lubri
-
cating and changing accessories.
16. MAKE SURE GUARDS ARE IN
PLACE AND WORK CORRECTLY
BEFORE USING MACHINERY.
17. REMOVE ADJUSTING KEYS
AND WRENCHES. Make a habit
of checking for keys and adjusting
wrenches before turning machinery
on.
18. CHECK FOR DAMAGED PARTS
BEFORE USING MACHINERY.
Check for binding and alignment
of parts, broken parts, part mount
-
ing, loose bolts, and any other
conditions that may affect machine
operation. Repair or replace dam
-
aged parts.
19. USE RECOMMENDED
ACCESSORIES. Refer to the
instruction manual for recom
-
mended accessories. The use of
improper accessories may cause
risk of injury.
20. DO NOT FORCE MACHINERY.
Work at the speed for which
the machine or accessory was
designed.
21. SECURE WORKPIECE. Use clamps
or a vise to hold the workpiece when
practical. A secured workpiece pro
-
tects your hands and frees both
hands to operate the machine.
22. DO NOT OVERREACH. Keep
proper footing and balance at all
times.
23. MANY MACHINES WILL EJECT
THE WORKPIECE TOWARD THE
OPERATOR. Know and avoid con-
ditions that cause the workpiece to
"kickback."
24. ALWAYS LOCK MOBILE BASES
(IF USED) BEFORE OPERATING
MACHINERY.
25. BE AWARE THAT CERTAIN
WOODS MAY CAUSE AN ALLER
-
GIC REACTION in people and ani
-
mals, especially when exposed to
fine dust. Make sure you know
what type of wood dust you will be
exposed to and always wear an
approved respirator.