Filter
Top Products
G9922 Oscillating Spindle Sander -9-
SECTION 4: ASSEMBLY
Overview
All die-cut metal parts have a sharp edge
(called “flashing”) on them after they are
formed. This is generally removed at the
factory. Sometimes a bit of flashing might
escape inspection, and the sharp edge may
cause cuts or lacerations when handled.
Please examine the edges of all die-cut
metal parts and file or sand the edge to
remove the flashing before handling.
Most of your G9922 Oscillating Spindle Sander
has been assembled at the factory. The few
pieces that remain should go together quickly and
easily. Only a few common tools are required to
assemble your oscillating spindle sander. 12 x
14mm and 17 x 19mm double-end wrenches, as
well as an 8mm Allen
®
wrench are provided with
the machine. The following list provides the rec-
ommended order in which the sander should be
assembled:
• Steel Stand
• Sanding Unit and Stand
• Table and Sanding unit
• Spindle Sander
Before beginning the assembly process, we rec-
ommend you become familiar with the Model
G9922 Oscillating Spindle Sander’s parts and
controls. See the Parts Diagram at the end of the
manual for details.