Filter
Top Products
-10- G5959/G9957 12" Table Saw
SECTION 3: INTRODUCTION
We are proud to offer the Grizzly Model G5959/
9957 12" Table Saw. The Model G5959/9957 is
part of a growing Grizzly family of fine woodwork-
ing machinery. When used according to the
guidelines set forth in this manual, you can expect
years of trouble-free, enjoyable operation and
proof of Grizzly’s commitment to customer satis-
faction.
The Model G5959/9957 is an industrial grade
table saw intended for professional use. Features
include cast iron trunnions, 4" dust port, triple V-
belt drive, dual arbor (
5
⁄8" and 1"), cam lever fence,
magnetic switch, and a 5 H.P., 220V, single-
phase motor (7
1
⁄2 H.P., 220V, 3-phase motor for
G9957).
All running parts operate on shielded ball bear-
ings and require no maintenance for the life of the
bearings. We also offer many accessories for the
table saws including blades, outfeed rollers, a
sliding table and a mobile base. Please refer to
our current catalog for prices and ordering infor-
mation.
We are also pleased to provide this manual with
the Model G5959/9957. It was written to guide
you through assembly, review safety considera-
tions, and cover general operating procedures. It
represents our effort to produce the best docu-
mentation possible. If you have any comments
regarding this manual, please write to us at the
address below:
Grizzly Industrial, Inc.
C
/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Commentary
Most importantly, we stand behind our machines.
If you have any service questions or parts
requests, please call or write us at the location
listed below:
Grizzly Industrial, Inc.
2406 Reach Road
Williamsport, PA 17701
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
After Fall 2001:
Grizzly Industrial, Inc.
1203 Lycoming Circle
Pennsdale, PA 17756
The specifications, drawings, and photographs
illustrated in this manual represent the Model
G5959/9957 as supplied when the manual was
prepared. However, owing to Grizzly’s policy of
continuous improvement, changes may be made
at any time with no obligation on the part of
Grizzly. Whenever possible, though, we send
manual updates to all owners of a particular tool
or machine. Should you receive one, we urge you
to insert the new information with the old and keep
it for reference.
Read the manual before
assembly and opera-
tion. Become familiar
with the machine and
it’s operation before
beginning any work.
Serious personal injury
may result if safety or
operational information
is not understood or fol-
lowed.