Grizzly G9957 Saw User Manual


 
-12- G5959/G9957 12" Table Saw
Clean up
The table and other unpainted parts of the Model
G5959/9957 are coated with a waxy grease that
protects them from corrosion during shipment.
Clean this grease off with a solvent cleaner or cit-
rus-based degreaser such as Grizzly’s G7895
Degreaser. Do not use chlorine-based solvents –
if you happen to splash some onto a painted sur-
face, you will ruin the finish.
Site Considerations
1. Floor Load: Your Model G5959/9957 repre-
sents a large weight load in a small footprint.
Most commercial floors are suitable for the
saw. Some residential floors may require
additional bracing to support both machine
and operator.
2. Working Clearances: Consider existing and
anticipated needs, size of material to be
processed through each machine, and
space for auxiliary stands, work table or
other machinery when establishing a loca-
tion for your table saw.
3. Lighting and Outlets: Lighting should be
bright enough to eliminate shadows and pre-
vent eye strain. Electrical circuits should be
dedicated or large enough to handle amper-
age requirements. Outlets should be located
near each machine so power or extension
cords are clear of high-traffic areas. Observe
local electrical codes for proper installation
of new lighting, outlets, or circuits.
Make your shop “child
safe.” Ensure that your
workplace is inaccessible
to youngsters by closing
and locking all entrances
when you are away. Never
allow visitors in your shop
when assembling, adjust-
ing or operating equip-
ment.
Do not use gasoline or
other petroleum-based
solvents. They have low
flash points which make
them extremely flamma-
ble. A risk of explosion
and burning exists if
these products are
used. Serious personal
injury may occur if this
warning is ignored.
Do not smoke while using
solvents. A risk of explo-
sion or fire exists and may
result in serious personal
injury.
Many of the solvents
commonly used to clean
machinery can be toxic
when inhaled or ingest-
ed. Always work in well-
ventilated areas far from
potential ignition sources
when dealing with sol-
vents. Use care when dis-
posing of waste rags and
towels to be sure they do
not create fire or environ-
mental hazards.