Filter
Top Products
-8- G9958 4 H.P. Dust Collector
Unpacking Piece Inventory
NOTICE
A full parts list and breakdown can be found
toward the end of this manual. For easier
assembly, or to identify missing parts,
please refer to the detailed illustrations at
the end of the manual.
After all the parts have been removed from the
carton as shown in Figure 2, you should have:
• Main Base
• Right and Left Side Base
• Right and Left Side Legs
• Fan/Motor Assembly
• Collector Bodies
• Eight Casters
• Gaskets
• Two Upper Bag Supports
• Two Hangers
• Hardware Bag
• Two Bottom Bags
• Two Upper Bags
• Four Hole Inlet
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be glad
to replace them, or, for the sake of expediency,
replacements can be obtained at your local hard-
ware store.
If moving this machine
up or down stairs, the
machine must be dis-
mantled and moved in
smaller pieces. Make
sure floor and stair
structures are capable of
supporting the com-
bined weight of the
machine parts and the
people moving them.
The G9958 is a heavy
machine, 320 lbs. ship-
ping weight. DO NOT
over-exert yourself
while unpacking or
moving your machine –
you will need assis-
tance. Serious personal
injury may occur if safe
moving methods are not
followed.
The Model G9958 is shipped from the manufac-
turer in a carefully packed carton. If you discover
the machine is damaged after you’ve signed for
delivery, immediately call Customer Service for
advice.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
Figure 2. G9958 parts layout.
Some metal parts may
have sharp edges on
them after they are
formed. Please examine
the edges of all metal
parts before handling
them. Failure to do so
could result in injury.