Filter
Top Products
H0603 18V Cordless Drill and Saw
-9-
SAW OPERATIONS
Getting Started
Fig 3. Top view.
Please take the time to familiarize yourself
with the controls of your new saw. Below
are listed the names of controls and fea-
tures found on the saw and an explanation
of their function. Please refer to Fig. 3, 4 &
5.
From Figure 3:
Blade Lock: Used to lock blade when
installing or removing blades.
Saw Base Lock Knob: Used when
adjusting base height / depth of cut.
Angle Lock Knob: Used when changing
angle of cut.
Edge Guide Lock Screw: Used with
edge guide, locks edge guide to pre-
determined distance from blade.
Dust Port: The 1
7
⁄16" port helps to clear
chips from workpiece.
Guide Notch: Provides a visual guide for
following a line through a cut.