Filter
Top Products
-10-
H8126 Wide Wheel Ginder
Inventory
After all the parts have been removed from the
box, you should have the following items:
Box Contents:
(Figures 3 & 4) Qty
A. Wide Wheel Grinder (Not Shown) .............. 1
B. Left Spark Guard ....................................... 1
Right Spark Guard (Not Shown) ................
1
C. Eye Shields ................................................ 2
D. Nut Plates ................................................... 2
E. Bracket ....................................................... 2
F. Left Tool Rest ............................................ 1
Right Tool Rest (Not Shown) .....................
1
G. Hardware and Tools (Not Shown):
Qty
— Hex Bolts
1
⁄4"-20 x
3
⁄8" (Eye Shield) ......... 2
— Phillip Head Screws 8-32 x
3
⁄8"
(Eye Shield) ............................................
4
— Flat Washers 4mm (Eye Shield) ............. 4
— Hex Nuts #8-32 (Eye Shield) .................. 4
— Flat Washers
1
⁄4" (Eye shield) ................. 2
— Flat Washers
5
⁄16" (Tool Rest) ................. 4
—Hex Bolts
5
⁄16"-18 x
3
⁄8" (Tool Rest) ......... 4
Figure 3. Left eye shield assembly.
If any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Figure 4. Left tool rest.
B
C
D
E
F
NOTICE
Some hardware/fasteners on the inventory
list may arrive pre-installed. Check mount
-
ing locations before assuming that any
items from the inventory list are missing.
Inventory