Filter
Top Products
Model H8224 HVLP Spray Gun -9-
Figure 10. G6261 Campbell Hausfeld™
water filter.
G6261—Campbell Hausfeld™ Water
Filter
Filtering out water and oil before it reaches
the spray gun is critical for high quality
spraying results. This filter is rated at 150
PSI maximum air pressure, and has a
1
⁄4"
NPT air inlet.
Figure 12. H7274 Campbell Hausfeld™
pressure regulator.
H7274—Campbell Hausfeld™ Pressure
Regulator
Since PSI drops as it travels through air
hose, attaching a regulator directly to the
spray gun ensures accurate air regulation
for the best results possible. Provides
regulated output pressure of 0 to 125 PSI
for proper tool operation. Locking pressure
knob prevents accidental adjustments. 15
SCFM flow capacity @ 90 PSI.
1
⁄4" NPT.
Figure 11. Red rubber air hose.
G8114—
3
⁄8" x 25 Ft. Air Hose
G8115—
3
⁄8" x 50 Ft. Air Hose
G8116—
3
⁄8" x 100 Ft. Air Hose
We recommend dedicating an air hose for
spraying use only, keeping it clean and
free of water and oil by using a filter on the
incoming end. Multi-purpose red rubber
air hose is flexible and abrasion resistant.
Features 200 PSI rating, 800 PSI bursting
strength, and
1
⁄4" NPT ends.
ACCESSORIES
Figure 13. H3275 Coil Hose.
H3275—
1
⁄4" NPT x 25' Recoil Hose
H3276—
1
⁄4" NPT x 50' Recoil Hose
These recoil hoses are great dedicated air
hoses because they are extremely light
weight and maneuverable, which makes
hours of spraying less tiring on wrists and
arms.