Filter
Top Products
Model H8224 HVLP Spray Gun-4-
SETUP
Your spray gun left our warehouse in a
carefully packed box. If you discover the
spray gun is damaged after you have
signed for delivery, please immediately
call Customer Service at (570) 546-9663
for advice.
Save all packing materials for possible
inspection by the carrier or its agent.
Otherwise, filing a shipping claim can be
difficult.
After you have unpacked the box, you
should find the following items with
your spray gun:
Model H8224 Inventory (Figure 1) Qty
A. Cup 120cc ..........................................1
B. Multi-Wrench ...................................... 1
C. Cleaning Brush .................................. 1
D. Barbed Hose Fitting w/Nut .................1
E. Plastic Filters ...................................... 2
Note: One of the plastic filters may
come pre-installed in the spray gun.
Inventory
Before assembling and using the spray gun,
thoroughly clean and dry all parts. Please
refer to Cleaning in the MAINTENANCE
section on Page 10 for more detailed
instructions. Make sure all connections are
tight enough to prevent air leaks but not so
tight as to damage the tool.
To setup the spray gun:
1. Insert the filter into the gun body (see
Figure 2). Note: One of the plastic
filters may come pre-installed in the
spray gun; if so, skip this step.
Assembly & Setup
Figure 3. Cup installed.
Gun Body
Cup
Connection
Point
Air Fitting
Figure 1. Inventory components shipped
with Model H8224.
B
A
C
D
Figure 2. Installing filter.
2. Attach the cup to the gun body as
shown in Figure
3.
E