Model H8224 HVLP Spray Gun -1-
Safety Instructions For Spray Guns
1. READ THIS MANUAL. This gun may
cause personal injury if used incor-
rectly. This manual contains proper
safety and operating instructions that
must be followed to reduce this risk.
2. WEAR EYE PROTECTION. Material
sprayed into eyes may cause seri-
ous injury or blindness. Always wear
safety goggles ANSI approved for
spraying (sealing type) to reduce your
risk from this hazard.
3. SPRAY IN VENTILATED AREA.
Airborne particles and fumes are
toxic and can cause brain damage or
death. To reduce your risk, only use
the spray gun in a well ventilated area
with adequate supply of fresh air.
For Your Own Safety Read Instruction Manual
Before Operating This Equipment
The purpose of safety symbols is to attract your attention to possible hazard-
ous conditions. This manual uses a series of symbols and signal words which
are intended to convey the level of importance of the safety messages. The
progression of symbols is described below. Remember that safety messages by
themselves do not eliminate danger and are not a substitute for proper accident
prevention measures.
Indicates a potentially hazardous situation which, if
not avoided, MAY result in minor or moderate injury.
It may also be used to alert against unsafe practices.
Indicates a potentially hazardous situation which, if
not avoided, COULD result in death or serious injury.
Indicates an imminently hazardous situation which,
if not avoided, WILL result in death or serious injury.
This symbol is used to alert the user to useful informa-
tion about proper operation of the equipment.
SAFETY
NOTICE
4. WEAR A RESPIRATOR. Airborne
material from spraying can be very
hazardous to lungs. Always wear a
respirator NIOSH approved for spray-
ing and fumes of your material type;
or use a supplied air respirator sys-
tem that delivers fresh air from an
outside location via hoses.
5. MAINTAIN EQUIPMENT. Pressurized
spray guns or hoses may burst unex-
pectedly if damaged or poorly main-
tained, causing serious injury. Fix
air leaks immediately and follow all
recommended maintenance. Never
operate this spray gun with loose
or disassembled components. Never
modify the spray gun.