Grizzly H8235 Nail Gun User Manual


 
Model H8235 3-Piece Framing/Brad/Palm Nailer Kit
-4-
Operating these nailers can propel
objects into the air, causing imme-
diate eye damage. To protect your-
self, always wear American National
Standards Institute (ANSI) approved
safety glasses or goggles when
operating this equipment. In addi-
tion, these nailers discharge at up
to 85-90 decibels. To protect your
hearing, always wear ANSI approved
ear protection when operating these
nailers.
Never point these nailers at yourself
or another person! Always pay atten-
tion to the direction these nailers are
pointed. Use these tools with respect
and caution to lessen the possibility of
operator or bystander injury. Ignoring
this warning may result in serious
personal injury.
Nailer accidents routinely happen
while moving the gun to another
location, such as up ladders, to
another room, or even another job
site. Always disconnect the gun
immediately after use and never
transport the gun while connected to
the air—even if the air compressor is
disconnected from its power source!
No list of safety guidelines can be
complete. Every shop environment
is different. Always consider safety
first, as it applies to your individu-
al working conditions. Use this and
other tools with caution and respect.
Failure to do so could result in seri-
ous personal injury, damage to equip-
ment or poor work results.
Read the manual before operation.
Become familiar with these nailers,
their safety instructions, and their
operation before beginning any work.
Serious personal injury may result if
safety or operational information is
not understood or followed.