Filter
Top Products
Model T25100 (Mfg. Since 8/12)
-17-
SECTION 6: MAINTENANCE
Cleaning
For optimum performance from your tool, follow
this maintenance schedule and refer to any spe-
cific instructions given in this section.
Daily Check:
• Damaged spray gun components.
• Worn or damaged wires/cables.
• Any other unsafe condition.
Daily Maintenance:
• Clean the tool.
• Check/replace moisture filter.
Schedule
To reduce risk of shock or
accidental startup, always
disconnect equipment from
power before adjustments,
maintenance, or service.
Cleaning the Model T25100 is simple and straight-
forward.
To clean the Model T25100:
1. DISCONNECT TOOL FROM POWER!
2. DISCONNECT TOOL FROM AIR!
3. Ground the spray gun conductor pole to the
grounding clip to remove any residual electri-
cal charge.
4. Put on eye, lung, and skin protection.
5. Put uncontaminated powder back into the
original container and store it in a dry, stable
environment.
6. In a well-ventilated area, use compressed air
to blow away the powder from the spray gun,
powder cups, control box, and foot switch.