GTO GTO Stud Sensor User Manual


  Open as PDF
of 9
 
4
Wireless Exit Sensor
6 inches
deep
Sensor
NOTE: DO NOT place in the direct path of a sprinkler.
The module is water resistant but not waterproof.
• DiganarrowtrenchorslitfromtheVehicle
 Sensortothetransmitterlocationusingaat
spadeorothertool.Thewirefromthewandto
thetransmittershouldbeatleastsixinches
deeptoavoidpossibledamagefromedgers,
orlawnaerators.
GTO WIRELESS EXIT WAND
TRANSMITTER
CODE
MED
TRANSMIT
ACTIVE
MIN MAX
SENSITIVITY
• FeedtheSignalCablethroughthePVCpipe
andplugintotheconnectoratthebottomof
theElectronics/Transmittermodule.
Connecting the Electronics/Transmitter Module
Install the Electronics/Transmitter Module
 previous next