Filter
Top Products
Dolphin® 7900 Series Net Base Quick Start Guide 3
Power Supply
Setting up the Net Base
1. Make sure the power switch on the power adapter is in the OFF position.
2. Plug the power cord into the power adapter.
3. Plug the power connector cable into the power connector on the back panel
of the Net Base.
4. Plug the power cord into a standard wall outlet.
5. Plug the CAT-5 Ethernet cable into either of the RJ-45 connectors on the
back panel of the Net Base.
6. Plug the Ethernet cable into the network.
7. On the power adapter, turn the power switch to the ON position.
8. The COMM LEDs on all four slots flash as the Net Base finds the DHCP
server during the bootloader and kernel sequences.
3RZHU&RUG
212))
6ZLWFK
213RVLWLRQ
3RZHU$GDSWHU
3RZHU
&RQQHFWRU
&DEOH