Filter
Top Products
Dolphin® 7900 Series Net Base Quick Start Guide 5
If Your DNS Server Does Not Support Bind 8.3 or Later
If your DNS server does not support Bind version 8.3 or later, Hyperterminal™
or an equivalent terminal emulator program must be installed on the host PC to
configure the Net Base.
1. Connect the serial cable to the Serial DB-9 Connector on the back of the Net
Base and a COM port on the host computer.
2. Start Hyperterminal or an equivalent terminal emulator program. Use these
settings: 115200 bps, 8,N,1.
3. Power up and wait until the COMM LEDs have stopped flashing. The COMM
LEDs stop flashing when the Net Base has found the DHCP server.
4. Enter the user name <handheld> and default login password <handheld>
to log into Net Base configuration utility. The Net Base menu program
displays.
5. Enter choice 2 (View Current Values) to display IP addresses.
6. Record the IP address for the Ethernet port.
7. Open the web browser on your PC and enter the IP address for the Net Base
you wrote down in Step 6.
8. Press ENTER and the online configuration utility displays on your PC.
*************************************************
* Welcome to the Hand Held Products Net Base *
*************************************************
SD00032Login: handheld
Password: ********
1) View System Configuration
2) View Current Values
3) Express Setup
4) Advanced Setup
5) System Statistics
6) System Diagnostics
7) Help
x) Exit
Enter choice: 2