Filter
Top Products
Additional Set-Up Instructions for Threading Gears
When the lathe is ON and the Spindle is revolving, the threaded bar and the Thread Dial Indicator
will also be revolving (see below).
Insure that the Alignment Mark is lined up with the
Thread Dial Indicator before operation.
Move the cutting blade to the proper position, and adjust theThread Dial Indicator to the desired
mark. Pull down the Handle and the Mini Lathe starts threading automatically.
Remember: After thread cutting operation is complete, change back to the factory set-up gear
setting:
Position A= 20T
Position B= 80T
Position C= 20T
Position D= 80T
#33684 Page 12
Top View
Thread Indicator Housing
Thread Dial Indicator
Indicator Housing
SKU #33684 Page 12