Filter
Top Products
Page 2SKU 37793 For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Motor 23,000 RPM, electrical brake
Power 2.5 HP
Power Consumption 15 Amps @ 120VAC, 60 Hz, single phase
Power Cord 8 foot, 14 AWG
Collet Capacity 1/4, 1/2, and 3/4 inch
Maximum Plunge 2-1/2 inches; 3 adjustable plunge settings
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside of the
front cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow
all instructions listed below may result in electric shock, re, and/or
serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
Do not operate power tools in explosive atmospheres, such as in the
presence of ammable liquids, gases, or dust. Power tools create sparks which
may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
Use tool in a well ventilated area.
ELECTRICAL SAFETY
Grounded tools must be plugged into an outlet properly installed and grounded in
accordance with all codes and ordinances. Never remove the grounding prong or
modify the plug in any way. Do not use any adapter plugs. Check with a qualied
electrician if you are in doubt as to whether the outlet is properly grounded. If the
1.
2.
3.
4.
1.