Filter
Top Products
SKU 42528 Page 2For technical questions, please call 1-800-444-3353.
SPECIFICATIONS #42528 AIR BRAD NAILER
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instruc-
tions, operating and maintenance procedures, parts list and diagram. Keep your invoice with
this manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Do not expose to rain. Keep work area well lit. Do not use electrically powered
tools in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not let them
handle machines, tools, extension cords, or air hoses.
4. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit
rust. Always lock up tools and keep out of reach of children.
5. Use the right tool for the job. Do not attempt to force a small tool or attachment to do
the work of a larger industrial tool. There are certain applications for which this tool was
designed. It will do the job better and more safely at the rate for which it was intended.
Do not modify this tool and do not use this tool for a purpose for which it was not intended.
6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving
parts. Protective, electrically non-conductive clothes and non-skid footwear are
recommended when working. Wear restrictive hair covering to contain long hair.
:eziStelnIriA
1
/
4
)elameF(TPN” :erusserPgnitarepO isp59ot55
:sdarB :epyT
).aG81(knahS"240.-930.
daeHmuideM
:yticapaCenizagaM sdarb001
:reggirT epyTtcatnoC
:htgneL
3
/
8
-1ot”
3
/
61
” :snoisnemiDllarevO -01
1
/
4
-7xW”2xL”
3
/
8
H”
:elpmaxE 50233UKS :thgieWteN .sbL02.2
FEATURES OF THIS AIR BRAD NAILER
1. This lightweight yet powerful air nailer will make short work of most nailing jobs.
2.
1
/
4
” NPT air inlet size accepts most often used shop size air hose adapters.
3. Safety trigger will not discharge unless the nailer is in contact with a surface.
4. 100 brad magazine capacity reduces down time for reloading.
5. Wide range of brad sizes makes this the right nailer for most jobs.
6. Sturdy die-cast aluminum and steel construction assures long service life.