Filter
Top Products
Page 2SKU 43681
For technical questions, please call 1-800-444-3353.
NOTICE
The Warnings, Cautions, and Instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur. It must be understood by the operator that
common sense and caution are factors which cannot be built into this product, but must be sup-
plied by the operator.
SAVE THIS MANUAL
You will need the manual for the safety warnings and cautions, assembly instructions, oper-
ating procedures, maintenance procedures, trouble shooting, parts list, and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front cover.
Keep both this manual and your invoice in a safe, dry place for future reference.
READ ALL INSTRUCTIONS BEFORE USING THIS TOOL!
SPECIFICATIONS
Motor: 2HP, 1700 RPM, Reversible
Power Required: 220 V / 60 Hz, 1-Phase
Drive: Belt/Gear
Swing Over Bed: 12”
Swing Over Gap: 18.8”
Width of Gap: 7”
Center to Center: 37”
Spindle Bore Taper: MT5
Spindle Bore: 1.5”
Three Jaw Chuck Diameter: 6”
Spindle Speed: 18 Speed
Spindle Speed Range:
72; 82; 147; 168; 240; 275; 325; 370; 415; 476;
660; 760; 850; 975; 1080; 1240; 1380; 1600
Bed Way Heat Treatment: 46-52 HRC
Tool Post Type: 4-Position
Max. Tool Shank Size: 3/4” x 3/4” Lathe Bit
Tool Post Travel: Max. 3.5” , 0.001” per scale
Cross Slide Travel: 5.9”, 0.002” per scale
(Total Cut)
Longitudinal Feed Range: 0.005” - 0.0165” /R
(16 Steps)
Cross Feed Range: 0.0014” - 0.0049 /R
(16 Steps)
Tailstock Travel: Max 3.6”
Tailstock Spindle Bore Taper: MT3
Thread Indicator: Yes
Thread Feeding:
SAE: 4 - 112 TPI, Total 40 Setting
Metric: 0.25 - 7.5 mm, Total 19 Setting
Net Weight: 838 lb.
ACCESSORIES
(5) Hex Wrenches (3, 4, 5, 6, 8 mm)
(1) Screwdriver
(1) Oil Gun
(5) Changing Gears: T30, T32, T40 (2
pcs), T127/120
(1) Face Plate 9-3/4”
(1) Splash Guard
(1) Oil Tray
(1) Steady Rest
(1) Follow Rest
(2) Dead Center: #3
(1) Center Sleeve: #5 / 3
(1) Live Center: MT3
(1) 6” 4-Jaw Chuck
(1) Back Plate for 4-Jaw Chuck
(1) Tool Post Wrench
(1) Double End Wrenches 13-16
REV 02/07