Filter
Top Products
Page 2SKU 45885
Specifications
ITEM DESCR IPTION
Pow er C onsum ption
110 VAC , 60 H z, 1650 W atts, 2.2 H P
No load: 5A ; S tartup: 15A
Power Cord
6-1/2 feet, U L approved, 14 AW G , 3 prong plug;
double insulated
M otor Speed 5000 R PM
Fence D im ensions 22-3/4 x 4-7/8 inches
Table D im ensions 19-3/4 (W ) x 6-1/4 (H ) inches
Table Positive Stops 0, 15, 22.5, 30, 45 (left and right) degree m ite r
C u tting C apacity
3-1/2 (D ) x 12 (L) inches at 90 deg. (fro n t to b a c k )
1-3/4 (D ) x 10 (L) inches at 45 deg. (front to back)
Maximum Blade Height 4-1/2 inches
Saw Blade Tilt C apacity
0 to 45 degrees (right and le ft) m ite r
0 to 45 (L) degrees com pound
Shaft D iam eter 5/8 inch arbor
Scales Inches and degrees
Saw Blade 10 inch, carbide tipped; 0.065 inches (W )
Features
P ush-dow n lock
R etractable blade guard
Single slide bar extension
Accessories
Dust collector bag
2 carbon replacem ent brushes for m otor
Net W eight 48 lbs
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
REV 04/02
45885.p65 10/15/03, 10:41 AM2