Filter
Top Products
11. MAKE SURE THE WORKPIECE IS SUPPORTED AT ALL TIMES DURING
OPERATION. Use a Roller Stand (not provided) with larger workpieces if
necessary.
12. MAINTAIN CONTROL OF THE WORKPIECE AT ALL TIMES. Whenever
possible, secure the workpiece with clamps, in a vise, etcetera.
13. ALWAYS DISCONNECT THE POLISHER/SANDER FROM ITS ELECTRICAL
SUPPLY SOURCE WHEN NOT IN USE. Make sure to unplug the Polisher/
Sander when leaving the work area, moving the tool from one location to an-
other, handing the Polisher/Sander to another person, changing the Polishing/
Rubber Backing Plate disc.
14. THIS TOOL IS INTENDED TO BE USED ONLY AS A POLISHER AND AS A
SANDER. DO NOT ATTEMPT TO USE THIS TOOL AS AN ANGLE GRINDER
OR IN ANY OTHER WAY THAN ITS INTENDED PURPOSE. NEVER INSTALL
A CARBIDE TIPPED OR STEEL CIRCULAR SAW BLADE FOR USE IN THIS
POLISHER/SANDER. NEVER INSTALL A WOOD CARVING BLADE, CARV-
ING DISC WITH CHAIN SAW CUTTERS, OR A CUTTING CARVING DISC ON
THIS POLISHER/SANDER.
15. WARNING: Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities, contain chemicals known (to the State of California)
to cause cancer, birth defects or other reproductive harm. Some examples of
these chemicals are: lead from lead-based paints, crystalline silica from bricks
and cement or other masonry products, arsenic and chromium from chemically
treated lumber. Your risk from these exposures varies, depending on how often
you do this type of work. To reduce your exposure to these chemicals: work in a
well ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to filter out microscopic particles.
(California Health & Safety Code 25249.5 et seq.)
16. WARNING: People with pacemakers should consult with their physician(s)
before using this product. Operation of equipment in close proximity to a heart
pacemaker could cause interference or failure of the pacemaker.
UNPACKING
When unpacking, check to make sure all parts shown on the Parts List (page 11) are
included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
SKU 46507 PAGE 5