Filter
Top Products
Sku 46766 For technical questions, please call 1-800-444-3353. Page 2
THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the
owner’s record below:
Model___________ Serial No._____________ Purchase Date_____________
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Technical Specifications
Product Name: Foldable Shop Crane-2 Ton
Product Number: 46766
Adjust to Heights: 2 T = 42-3/4” H; 1-1/2 T = 49-11/16” H; 1 T = 56-7/8” H
1/2 T = 63-7/8” H
Max Boom Height: 105”
Swivel Hook: 360 Degrees
Dimensions (Folded) 33-1/2” W x 26” L x 66-1/2” H
Dimensions (Unfolded) 35” W x 72” L x 58-3/8” H
Latch: Spring Loaded
Construction: All Steel
Ram: 8 Ton
Weight: 255 LBS
Maximum Capacity: 4,000 LBS
Ram Travel: 19-1/4”
Ground Clearance: 1-1/8”
Front Boom Hook: 7” to Hook opening and 9-1/2” to Hook bottom
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment. Read all instructions
before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use product in damp or wet locations. Don’t expose to rain.
Keep work area well lighted.
3. Keep children away. Children must never be allowed in the work area. Do not let them handle
machines, tools, or extension cords.
4. Store idle equipment. When not in use, products must be stored in a dry location to inhibit rust.
Always lock up products and tools and keep out of reach of children.
5. Do not force product. It will do the job better and more safely at the rate for which it was intended. Do
not use inappropriate attachments in an attempt to exceed the product capacity.
6. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a
larger industrial tool. There are certain applications for which this product was designed. Do not modify
this product and do not use this product for a purpose for which it was not intended.