Filter
Top Products
Sku 46766 For technical questions, please call 1-800-444-3353. Page 6
Step 8) Attach the Hydraulic Ram (21) to the fork near the center of the Boom (13) with Bolt (22),
Washer (32) and Spring Washer (33). Tighten into place with Nut (18) - see Figure 4B on the
previous page.
Step 9) Slide the Boom Extension (16) into the Boom (13). Note that there are different settings for
the load. Secure the Boom Extension (16) at the setting
which exceeds the load
you will be
lifting. Insert Bolt (29), Washer (32) and Spring Washer (33) and secure with Nut (18) - see
Figure 5.
Boom Extension (16)
Boom (13)
Bolt (29)
Nut (18)
Washers (32,33)
Figure 5-Assembling the Boom Extension
Step 10) Attach the Hook (19a) around the end of the Boom Extension (16) using Bolt (20). Insert Bolt
(20) through one side of the Hook, through the Boom Extension (16), and out the other side
of the Hook (19a). Slide on Washer (34) and Spring Washer (35). Tighten in place with Nut
(2) - see Figure 6.
Hook (19a)
Boom Extension (16)
Nut (2)
Washers (34 & 35)
Bolt (20)
Figure 6-Attaching the Hook
Step 11) Insert the Jack Handle (23) into the socket on the Hydraulic Ram (21).
Operation
Step 1) Set the Boom Extension (16) to a weight limit setting that exceeds the weight you will be
lifting. Do not exceed the Maximum 2 Ton weight capacity. Insert Bolt (29), Washer (32) and
Spring Washer (33) and secure with Nut (18) - see Figure 5.
Step 2) Test the operation of the Shop Crane prior to lifting the load. Make certain that pumping the
Handle will raise a load. Verify that all hardware is tight and in good working order.
Step 3) Move the Crane so that the Hook (19) is directly above the item to be lifted. Make certain that
the safety latch on the Hook (19) fully closes. Securely attach the Hook (19) to the item.
Load must be secure in the Hook (19) with the safety latch fully closed. Make certain that the
load is sustained with chains or slings before using the Crane to lift it.
WARNING:
Never stand under an object that is being
lifted by the Shop Crane. Be aware of the
possibility of a load slipping off of the Hook.
An item that falls from the Crane can cause
serious injury.
safety latch
REV 05/05; 09/07