Filter
Top Products
SKU 66399 For technical questions, please call 1-800-444-3353. Page 3
Keep bystanders, children, and c.
visitors away while operating the
tool. Distractions are able to result in
the loss of control of the tool.
Personal safety
Stay alert. Watch what you are do-a.
ing and use common sense when
operating the tool. Do not use the
tool while tired or under the inu-
ence of drugs, alcohol, or medica-
tion. A moment of inattention while
operating the tool increases the risk
of injury to persons.
Avoid unintentional starting. Be b.
sure the switch is off before con-
necting to the air supply. Do not
carry the tool with your nger on the
switch or connect the tool to the air
supply with the switch on.
Do not overreach. Keep proper c.
footing and balance at all times.
Proper footing and balance enables
better control of the tool in unexpect-
ed situations.
d. Always wear eye protec-
tion. Wear ANSI-ap-
proved safety goggles.
e. Always wear hearing
protection when using
the tool. Prolonged expo-
sure to high intensity noise
is able to cause hearing loss.
Tool use and care
Do not force the tool. a. Use the
correct tool for the application. The
correct tool will do the job better and
safer at the rate for which the tool is
designed.
Do not use the tool if the switch b.
does not turn the tool on or off.
Any tool that cannot be controlled
with the switch is dangerous and
must be repaired.
Disconnect the tool from the air c.
source before making any adjust-
ments, changing accessories, or
storing the tool. Turn the switch to
its off position and disconnect from
the battery.
Store the tool when it is idle out of d.
reach of children and other un-
trained persons. A tool is dangerous
in the hands of untrained users.
Maintain the tool with care. e.
Check for misalignment or bind-f.
ing of moving parts, breakage of
parts, air leaks, frayed wires, and
any other condition that affects the
tool’s operation. If damaged, have
the tool serviced before using. Many
accidents are caused by poorly main-
tained tools. There is a risk of burst-
ing if the tool is damaged.
Use only accessories that are g.
identied by the manufacturer for
the specic tool model. Use of an
accessory not intended for use with
the specic tool model, increases the
risk of injury to persons.
Service
Tool service must be performed a.
only by qualied repair personnel.
When servicing a tool, use only b.
identical replacement parts. Use
only authorized parts.