Filter
Top Products
SKU 66399 For technical questions, please call 1-800-444-3353. Page 5
Only use with accessories rated to 4.
handle the forces exerted by this tool
during operation. Other accessories
not designed for the forces gener-
ated may break and forcefully launch
pieces.
Attach all accessories properly to the 5.
tool before connecting the air sup-
ply. A loose accessory may detach or
break during operation.
Vibration Precautions
This tool vibrates during use. Re-
peated or long-term exposure to vibra-
tion may cause temporary or permanent
physical injury, particularly to the hands,
arms and shoulders. To reduce the risk of
vibration-related injury:
Anyone using vibrating tools regu-
larly or for an extended period should
rst be examined by a doctor and
then have regular medical check-
ups to ensure medical problems are
not being caused or worsened from
use. Pregnant women or people
who have impaired blood circulation
to the hand, past hand injuries, ner-
vous system disorders, diabetes, or
Raynaud’s Disease should not use
this tool. If you feel any symptoms
related to vibration (such as tingling,
numbness, and white or blue ngers),
seek medical advice as soon as pos-
sible.
WARNING! THE METAL PARTS OF
THE COMPRESSOR AND HOSES
WILL BECOME HOT DURING USE.
SAVE THESE
INSTRUCTIONS.
FUNCTIONAL DESCRIPTION
Specications
Maximum Air Pressure 115 PSI
Speed
Fills Car Tire in Approx.
3 Minutes
Air Flow
1.3 SCFM @ 40 PSI
0.9 SCFM @ 90 PSI
Rated Air Pressure 0-115
Maximum Power 12VDC, 30 AMPS
Permanently Lubricated
Do not add oil or any
other lubricant
INITIAL TOOL SET UP/
ASSEMBLY
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
Unpacking
When unpacking, make sure that
the item is intact and undamaged. If any
parts are missing or broken, please call
Harbor Freight Tools at the number shown
throughout the manual as soon as pos-
sible.
This air tool may be shipped with a •
protective plug covering the air inlet.
Remove this plug before set up.
Note: Air ow, and therefore tool perfor-
mance, can be hindered by under-
sized air supply components.