Filter
Top Products
SKU 90374 PAGE 8
SYMBOLOGY
Double Insulated
Canadian Standards
Association
Underwriters
Laboratories, Inc.
Volts Alternating Current
Amperes
No Load Revolutions
per Minute (RPM)
n
o
xxxx/min.
A
V ~
SPECIFIC SAFETY RULES
1. Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding workspace. Always keep the work area free of
obstructions, grease, oil, trash, and other debris. Do not use the Combo Pack in
areas near flammable chemicals, dusts, and vapors.
2. Maintain labels and nameplates on the Combo Pack. These carry
important information. If unreadable or missing, contact Harbor Freight Tools for
a replacement.
3. Ground this product. To comply with the National Electric Code, and to provide
additional protection from the risk of electrical shock, the Battery Charger (1B)
should only be connected to a 120 volt electrical outlet that is protected by a
Ground Fault Circuit Interrupter (GFCI).
4. When using a hand-held power tool, always maintain a firm grip on the tool
with both hands.
5. To avoid electrical shock, do not pull or carry the Battery Charger/Charger
Base (1B, 1C) by its Power Cord or pull the Power Cord around sharp
corners or edges. Do not unplug the Battery Charger by pulling on the Power
Cord. Keep the Power Cord away from heated surfaces.
6. Never leave the Battery Charger (1B) unattended when it is plugged into an
electrical outlet. Make sure to unplug the Battery Charger from its outlet before
leaving.
REV 04f