Filter
Top Products
SKU 91938 For technical questions, please call 1-800-444-3353. Page 5
23. Use only accessories that are recommended by the manufacturer of your
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
SERVICE
24. Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
25. When servicing a tool, use only identical replacement parts. Follow
instructions in the “Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates on the Cut-Off Saw. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a replace
ment
2. Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding workspace. Always keep the work area free of ob-
structions, grease, oil, trash, and other debris. Do not use a power tool in areas
near flammable chemicals, dusts, and vapors. Do not use this product in a damp
or wet location.
3. Avoid unintentional starting. Make sure you are prepared to begin work
before turning on the Cut-Off Saw.
4. Do not force the Cut-Off Saw. This tool will do the work better and safer at
the speed and capacity for which it was designed.
5. Always keep the extension cord away from moving parts on the tool.
6. Keep hands and fingers away from the cutting area and the Cut-Off Wheel.
Keep one hand on the handle and the other on the motor housing. If both hands
are holding the saw, you hands and fingers cannot be cut by the Cut-Off Wheel.
7. Do not reach under the base of the Cut-Off Saw. The Swing Guard (53)
cannot protect you from the Cut-Off Wheel below the base.