Filter
Top Products
SKU 92386 For technical questions, please call 1-800-444-3353. Page 2
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operat-
ing, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts Lists on page
23 are included. If any parts are missing or broken, please call Harbor Freight Tools at
the number shown on the cover of this manual as soon as possible.
IMPORTANT SAFETY INSTRUCTIONS
E105017
REV 08/05; REV 12/06
Electrical Requirements 120 V / 60 Hz / 3550 RPM / 1.5 HP/ Single Phase
3-Prong Power Cord Plug / Power Cord Length: 9 Ft
Coolant Pump Type Submersible Fountain Pump w/Flow Adjustment / 246 GPH Capacity
Required Blade Size / Style 7” Diameter / Continuous Rim Diamond Blade / Minimum 3550 RPM
Maximum Cutting Depth 1” @ 90° / 1” @ 45°
Maximum Cutting Length 25-3/8”
Maximum Tile Size 24” x 24”
Saw Bevel Capacity 0° to 45° in 2.5° Increments – Left Tilt Only
Miter Gauge Capacity 0° to 45° in 1° Increments – Right Angles Only
Rip Fence Scale 0” to 8-1/4” in 1/8” Increments / 0mm to 21mm in 2mm Increments
Spindle Size 5/8”
Fence Type Fixed
Coolant Basin Capacity 4 Gallons
Basin Dimensions 15” W x 22-3/4” L x 3-1/8” H
Work Table Dimensions 18” W x 32-3/4” L
Overall Dimensions 18-1/4” W x 42-1/4” L x 47-1/2” H
Weight 89 Pounds
Accessories Arbor Nut Wrenches (Qty. 2) / 7” Diameter Saw Blade (Qty. 1)