Filter
Top Products
Page 2SKU 93119
For technical questions, please call 1-800-444-3353.
Specifications
Maximum Pressure 80 PSI Air Inlet 1/4” NPT
Working Pressure 30-60 PSI Net Weight 20.5 lb.
Tank Capacity 2.5 gallons Dimensions 9
3
/
4
” Diameter x 18
1
/
2
”
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to reduce
the risk of personal injury and damage to equipment. Failure to observe these warnings
and precautions could result in explosive failure of the pot, its components or attachments
and in serious injury to self or others.
Read all instructions before using this tool!
Keep work area clean. Cluttered areas invite injuries.
Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
Keep children and animals away. Children must never be allowed in the work area.
Do not let them handle machines, tools, or hoses.
Store idle equipment. When not in use, tools must be stored in a dry location to inhibit
rust. Always lock up tools and keep out of reach of children.
Do not force tool. It will do the job better and more safely at the rate for which it was
intended. Do not use inappropriate attachments in an attempt to exceed the tool capac-
ity.
Use the right tool for the job. Do not attempt to force a small tool or attachment to do
the work of a larger industrial tool. Do not use a tool for a purpose for which it was not
intended.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving
parts. Protective, electrically nonconductive clothes and nonskid footwear are recom-
mended when working. Wear restrictive hair covering to contain long hair.
Use eye and ear protection. Always wear ANSI-approved impact and chemical splash
safety goggles. Coatings can produce eye irritation. When cleaning tools exercise
caution when using solvents. They can be forcefully ejected from the tool’s nozzle and
1.
2.
3.
4.
5.
6.
7.
8.
REV 06/06