Filter
Top Products
Page 4SKU 93119
For technical questions, please call 1-800-444-3353.
Do not discard or make any alterations to the safety valve. Tampering with, welding
or drilling the pot can weaken it.
CAUTION: Do not use abrasive, corrosive or rust inducing materials with this pot. It is
not designed for those materials. To use them can damage the pot’s internal parts.
Industrial applications must follow OSHA requirements.
Read all information concerning coating products and cleaning solvents. Chlori-
nated solvents, such as 1-1-1 Trichloroethane and Methylene Chloride (also known as
methyl chloride) can chemically react with aluminum and explode. Many paint sprayers
contain aluminum. If you are in doubt about potential chemical reactions, contact the
coating or solvent manufacturer.
Check all seals before connecting the spray tool to the air supply.
Always ensure that the lid is fully attached to the can.
Always ensure that the retaining ring is screwed past the first thread.
Always ensure that the air supply is fully attached.
Do not use wrenches, pliers or other tools to tighten pot clamps. Use only the torque
you can apply with your hands.
WARNING: Never release the lid while the pot is pressurized.
Unpacking
When unpacking, check to make sure that all the parts are included. If any parts are miss-
ing or broken, please call Harbor Freight Tools at the number on the cover of this manual. If
any part of the machine is missing or broken, please, call Harbor Freight Tools at the num-
ber on the front cover, as soon as possible.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.