Filter
Top Products
SKU 93853 For technical questions, please call 1-800-444-3353 PAGE 16
PARTS LIST
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL
AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR
WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN
FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES
ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Part # Description Qty. Part # Description Qty.
1 Front Cap 1 45 Oil Cap 1
2 Axil Circlip (28) 1 46 O-Ring 1
3 Retainer Ring 1 47 Bolt (M4x14) 3
4 Slider 1 48 Spring Washer 3
5 Rubber Ring 1 49 Flat Washer 3
6 Spring Washer 1 50 Top Cover 1
7 Spring 1 51 O-Ring 1
8 Connecting Sheath 1 52 Wheel Box 1
9 Bolt (M10x30) 4 53 Oil Seal 1
10 Spring Washer 4 54 Bearing (6202) 1
11 Grip Slipper 1 55 Flat Washer 2
12 O-Ring 1 56 Spring Washer 2
13 Column Pin (8x19.5) 6 57 Bolt (M6x25) 2
14 Guard Ring Sleeve 1
58*
Tapping Bolt (ST4.8x65) 2
15 O-Ring 1
59*
Stator Holding Plate 2
16 Circlip 2
60*
Air Baffle 1
17 Oil Seal Ferrule 1
61*
Motor Casing 1
18 Top Cover 1 62 Handle 1
19 Secondary Striker 1 63 Tapping Bolt (ST4.8x25) 4
20 Anti-Vibration Ring 1 64 Capacitor 1
21 Guide Sheath 1 65 Switch 1
22 Cylinder Connector 1 66 Power Switch 1
23 O-Ring 1 67 Inductor 1
24 Ram 1 68 Tapping Bolt (ST4.2x16) 2
25 O-Ring 2 69 Cable Clamp 1
26 Control Bushing 1 70 Power Cord & Plug 1
27 Compression Spring 1 71 Cable Sheath 1
28 Piston Pin 1 72 Variable Speed Control Dial 1
29 Needle Bearing (NK14/16) 1
73*
Screw (M8x45) 8
30 Cylinder 1
74*
Flat Washer 4
31 Piston 1
75**
Brush Holder 2
32 Connecting Rod 1
76**
Carbon Brush 2
33*
Bearing Cap 1
77**
Brush Cap 2
34*
Bearing (6201) 1 78 Tapping Bolt (ST4.2x13) 4
35*
Stator 1 79 Cover 2
36*
Rotor 1 101 Bolt (M8x140) 1
37*
Fan 1 102 Clamp 2
38 Cylinder Case 1 103 Chuck Ring 1
39 Screw (M8x35) 4 104 Auxiliary Handle 1
40*
Spring (8) 8 105 Knob 1
41 O-Ring 1 106 Spade Chisel 1
42 Centripetal Needle Holder Assy. 2 107 Bull Point Chisel 1
43 Adjusting Washer 1
44 Large Gear 1 109* Complete Motor Assy.
(Includes parts 33*, 34*, 35*, 36*, 37*, 40*, 58*,
59*, 60*, 61*, 73*, 74*)
1
---------- ----------------------------------------------- --------- 110** Complete Carbon Brush Assy.
(Includes parts 75**, 76**, 77**)
1
* Cannot be ordered individually. Must be ordered as a complete Motor Assembly.
** Cannot be ordered individually. Must be ordered as a complete Carbon Brush Assembly.
REV 06/06