Harbor Freight Tools 93853 Power Hammer User Manual


 
SKU 93853 For technical questions, please call 1-800-444-3353 PAGE 7
19. Always unplug the Demolition Hammer from its electrical outlet before
performing and inspection, maintenance, or cleaning procedures.
20. Keep this product and all other tools and equipment away from children and
other unauthorized people. Do not allow spectators in the work area.
21. Performance of this tool (if powered by line voltage) may vary depending on
variations in local line voltage. Extension cord usage may also affect tool
performance.
22. Use the right tool for the job. Do not attempt to force a small tool to do the
work of a larger industrial tool. There are certain applications for which
this tool was designed. It will do the job better and more safely at the rate for
which it was intended. Do not modify this tool, and do not use this tool for a
purpose for which it is not intended.
17. Do not force the Chisel into the workpiece when cutting. Apply moderate
pressure, allowing the Chisel to cut without being forced.
18. Never attempt to remove material stuck in the moving parts of the
Demolition Hammer while it is plugged in and running.
23. WARNING! Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities, contain chemicals known (to the State of
California) to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are: lead from lead-based paints, crystalline silica
from bricks and cement or other masonry products, arsenic and chromium from
chemically treated lumber. Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety equipment, such as
those dust masks that are specially designed to filter out microscopic particles.
(California Health & Safety Code § 25249.5, et seq.)
24. WARNING! People with pacemakers should consult their physician(s)
before using this product. Operation of electrical equipment in close proximity to
a heart pacemaker could cause interference or failure of the pacemaker.
25. WARNING! The warnings and cautions discussed in this manual cannot
cover all possible conditions and situations that may occur. It must be understood
by the operator that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS