Filter
Top Products
SKU 93853 For technical questions, please call 1-800-444-3353 PAGE 5
maintained tools with a sharp cutting edge are less likely to bind and are easier
to control. Do not use a damaged tool. Tag damaged tools “Do not use” until
repaired.
22. Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool’s operation. If damaged, have
the tool serviced before using. Many accidents are caused by poorly
maintained tools.
23. Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
SERVICE
24. Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
25. When servicing a tool, use only identical replacement parts. Follow
instructions in the
“Inspection, Maintenance, And Cleaning”
section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates on the Demolition Hammer. These carry
important information. If unreadable or missing, contact Harbor Freight Tools for
a replacement.
2. Always wear ANSI-approved safety impact eye glasses and a full
face shield when using the Demolition Hammer. Also wear heavy
duty steel-toe boots, hearing protection, dust mask or respirator, and
heavy duty work gloves. Using personal safety devices reduce the risk for
injury.
3. Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding workspace. Always keep the work area free of
obstructions, grease, oil, trash, and other debris. Do not use a power tool in
areas near flammable chemicals, dusts, and vapors. Do not use this product in
a damp or wet location.
4. Avoid unintentional starting. Make sure you are prepared to begin work
before turning on the Demolition Hammer.