Filter
Top Products
Page 2SKU 95028
For technical questions, please call 1-800-444-3353
Specifications
Maximum RPM 20,000 RPM at 90 PSI
Maximum Air Pressure 90 PSI
Air Consumption 5 CFM at 90 PSI
Air Inlet Diameter 1/4” - 18 NPT (female inlet)
Spindle Diameter 3/8”
Accessories 3” Diameter Cut-Off Wheel
14 mm Spanner Wrench
5 mm Hex Key
Overall Dimensions 3-3/8” D X 7-3/8” L X 3” H
Weight 1.8 lbs.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Do not operate pneumatic tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Pneumatic tools create sparks
which may ignite flammables..
3. Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, extension cords, or air hoses.
4. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5. Use the right tool for the job. Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. There are certain applications for which this
tool was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this tool and do not use this tool for a purpose for which it
was not intended.