Filter
Top Products
SKU 95386 For technical questions, please call 1-800-444-3353. Page 11
AIR
OUTLET
VALVE
(63)
CONNECT
AIR HOSE HERE.
CLOSED POSITION
OPEN POSITION
FIGURE F
TOP VIEW
OIL PLUG
(31)
FIGURE D
add new oil through the oil fill holes.
Make sure not to overfill.
Screw on the Oil
Plug (31), being careful not to strip the threads.
2. Turn the Air Outlet Valve (63) to its CLOSED position. Then connect a high
pressure air hose (not included) equipped with a
quick connector
(not included) to
the Air Outlet Valve. If using a water filter and oiler in series with the Air Outlet
Valve of the Air Compressor, connect the other end of the air hose to the water
filter and oiler and connect the water filter and oiler to the air tool being used. If
not using a water filter and oiler, squirt several drops of air tool oil into the air
intake plug of the air tool. Then, connect the other end of the air hose directly from
the Air Outlet Valve of the Air Compressor to the air tool. (See Figure F.)
OIL SIGHT
GAUGE
(33)
KEEP OIL LEVEL
EVEN WITH
RED CIRCLE
FIGURE E