Filter
Top Products
SKU 95386 For technical questions, please call 1-800-444-3353. Page 7
1.
Grounded
tools require a three wire extension cord.
Double Insulated
tools can
use either a two or three wire extension cord.
2. As the distance from the supply outlet increases, you must use a heavier gauge
extension cord. Using extension cords with inadequately sized wire causes a serious
drop in voltage, resulting in loss of power and possible tool damage.
(See Figure C, next page.)
3. The smaller the gauge number of the wire, the greater the capacity of the cord. For
example, a 14 gauge cord can carry a higher current than a 16 gauge cord.
(See Figure C.)
4. When using more than one extension cord to make up the total length, make sure
each cord contains at least the minimum wire size required. (See Figure C.)
5. If you are using one extension cord for more than one tool, add the nameplate
amperes and use the sum to determine the required minimum cord size.
(See Figure C.)
6. If you are using an extension cord outdoors, make sure it is marked with the suffix
“W-A” (“W” in Canada) to indicate it is acceptable for outdoor use.
7. Make sure your extension cord is properly wired and in good electrical condition.
Always replace a damaged extension cord or have it repaired by a qualified
electrician before using it.
8. Protect your extension cords from sharp objects, excessive heat, and damp or wet
areas.
*SDROCNOISNETXEROFEGUAGERIWMUMINIMDEDNEMMOCER
ETALPEMAN
SEREPMA
)daoLlluFtA(
HTGNELDROCNOISNETXE
teeF52teeF
05teeF57teeF001teeF051
0.2-08181818161
4.3-1.28181816141
0.5-5.38181614121
0.7-1.58161412121
0.21-1.781412101-
0.61-1.21412101--
0.02-1.612101---
CERUGIF
evifotpordegatlovenilehtgnitimilnodesaB*
.serepmadetarehtfo%051tastlov
EXTENSION CORDS