Filter
Top Products
Page 9SKU 95951 For technical questions, please call 1-800-444-3353.
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
ASSEMBLY INSTRUCTIONS
Note: For additional information regarding the parts listed in the following pages, refer to
the Assembly Diagrams near the end of this manual.
1. WARNING! Make sure the Power Switch of the tool is in its “OFF” position and
that the tool is unplugged from the electrical outlet before making any adjustments
to the tool.
Remove the (4) Protection Bolts from the Electronic Scale before using this machine 2.
for the rst time. The four Protection Bolts (see photo below) are fastened to the
bottom of the machine. To do this:
Use a 6mm wrench to remove the bolts. Turn them counterclockwise to loosen. a.
Store the bolts in a safe place for future use.
Use the Power ON/OFF Switch to turn on the machine. b.
Press the “Recovering” and “Circulate” keys at the same time to reset the scale. c.
The word “Good” will appear in the LED display if the scale is working properly.
Prior to shipping this machine, replace the Protection Bolts to lock the scale in place 3.
to prevent damage.
Optional external coolant tank is discussed in this manual. This accessory is NOT 4.
INCLUDED with this machine and must be purchased separately. It is discussed
here for your convenience.
REV 09h
Protection Bolts