Filter
Top Products
Page 2SKU 96300
For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Use only with SKU 94847 Planishing Hammer
Materials Formed steel sheets with a powder-
coated finish, zinc plated hardware
Mounting Plate Dimension
12-3/4” L x 5-1/2” W x 0.151” T
Top Plate Mounting Holes/
Slots Dimension
3/4” diameter, four holes
1” L x 7/16” W, four slots
Base Mounting Hole Diameter
7/16” diameter, three holes
Hardware Thread Type
M8 x 1.25
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Keep this manual and invoice in a safe and dry place
for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
serious injury.
SAVE THESE INSTRUCTIONS
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
Keep bystanders, children, and visitors away. Distractions can cause you to lose
control. Keep children out of the work area.
Stay alert. Watch what you are doing and use common sense during assembly
and use of this product.
During assembly dress properly. Do not wear loose clothing or jewelry. Con-
tain long hair.
Do not overreach. Keep proper footing and balance at all times.
Use safety equipment during assembly. Always wear eye protection. Always
wear ANSI-approved safety goggles when assembling and using the Planishing
Hammer Stand.
1.
2.
3.
4.
5.
6.
REV 07j