Filter
Top Products
Page 3SKU 96300
For technical questions, please call 1-800-444-3353.
Do not force the product. Use the correct product for your application. The
correct product will do the job better and safer at the rate for which it is designed. Do
not force the product and do not use it for a purpose for which it is not intended.
Store an idle Planishing Hammer Stand out of reach of children and other
untrained persons.
Maintain this product with care.
Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one product may become hazardous
when used on another product.
Maintain labels and nameplates on the Planishing Hammer Stand. These carry
important information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
Maintain a safe working environment. Make sure there is adequate surrounding
workspace. Do not use this product in a damp or wet location.
Do not use to support any items other than SKU 94847, Planishing Hammer.
Use on a flat, level surface capable of supporting the Planishing Hammer
Stand, the Planishing Hammer, the metal being worked on, and the vibration
of the planishing process.
Do not use this Planishing Hammer Stand as a stepping stool or ladder. Never
sit, stand, or climb on this Planishing Hammer Stand. Never allow children to play
on or climb on this Stand.
Only fill the Planishing Hammer Stand with sand.
ASSEMBLY INSTRUCTIONS
Note: For additional information regarding the parts listed in the following pages, refer to
the Assembly Diagram on page 7.
Connect Main Support (3) to Table Support (2). Insert two Bolts (6) with Washers
(10) down through the Table Support (2) and Main Support (3). Slide on two more
Washers (10), Spring Washers (9) and thread on the Nuts (7).
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
1.