Filter
Top Products
Page 10SKU 98676 For technical questions, please call 1-800-444-3353.
To use the Headstock Spur (3) and 4.
To install the Headstock Spur (3) 4.
and Tailstock Spur (61), remove the
Faceplate (2) from the Headstock
Spindle (4) using the Push Out Rod
(22) and Wrench (47). Insert the
Headstock Spur into the Spindle hole.
then insert the Tailstock Spur into the
Tailstock hole. To remove either the
Headstock Spur or Tailstock Spur
insert the Push Out Rod into the hole
at the opposite end of the Headstock
or Tailstock. (See Figures D and E.)
FIGURE D
FACEPLATE
(2)
WRENCH
(47)
PUSH OUT ROD
(22)
HEADSTOCK
SPUR
(3)
To install the Digital Readout (79), 5.
use the two Screws (80).
(See Figure F.)
FIGURE E
PUSH OUT ROD
(22)
HEADSTOCK HOLE
TAILSTOCK
HOLE
TAILSTOCK
SPUR
(61)
FIGURE F
DIGITAL READOUT
(79)
SCREWS
(80)
6. The Lathe is now assembled.
(See Figure G.)
FIGURE G
FIGURE C
FACEPLATE
(2)
FLAT HEAD
BRASS
WOOD
SCREWS
(83)
WOODSTOCK
(NOT INCLUDED)