Filter
Top Products
Page 2- SKU: 98870
SPECIFICATIONS
Input Power 115/230 V~ , 42 A
Maximum Amperage Output 120 A
Electrode Sizes
(Note: Electrodes not included)
1/16” to 5/64” (115V)
1/16” to 3/32” (230V)
Features
This is a high-quality hobby arc welder, delivering up to 140 Amps welding current. It
will hold electrodes sizes from 1/16” to 3/32” in diameter. It is thermally protected, and has
a high temperature warning light. Step-less variable Amperage is easily adjustable using a
control knob, with an easy-to-read gauge on top of the unit. This welder is easily portable,
using the attached carrying handle. This welder will use either 115 Volt or 230 Volt current.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instruc-
tions, operating and maintenance procedures, parts list and diagram. Keep your invoice with
this manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
SAFETY WARNINGS AND PRECAUTIONS
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
Keep work area clean. Cluttered areas invite injuries.
Observe work area conditions. Do not use machines or power tools in damp or
wet locations. Don’t expose to rain. Keep work area well lighted. Do not use elec-
trically powered tools in the presence of ammable gases or liquids.
Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
Do not force tool. It will do the job better and more safely at the rate for which it
was intended. Do not use inappropriate attachments in an attempt to exceed the
tool capacity.
Use the right tool for the job. Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. Do not use a tool for a purpose for which it
was not intended.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
1.
2.
3.
4.
5.
6.
7.