HP (Hewlett-Packard) SCSI Welding System User Manual


 
1. 48x IDE (ATAPI) CD-ROM
5. Four DIMM Sockets, for up to 4GB DDR memory
2. Removable Media Bays
6. System Fan
3. Four Hot-Plug (shown) or Four Non hot-plug (not shown)
Drive Bays
7. 350W Power Supply
4. Four Expansion Slots (Two PCI-X, One PCI, and One PCI
Express)
At A Glance
Supports a single 3.0 GHz, 3.20 GHz, or 3.40 GHz Intel® Pentium® 4 processor with 1MB or 2MB cache size or a
single 2.8 GHz Intel Celeron processor with 256KB cache size.
Intel® Pentium® 4 processors include support for Hyper-Threading
Intel E7221 Chipset supporting 800MHz FSB (with Pentium 4 processor) or 533MHz FSB (with Celeron processor)
PC3200 400MHz DDR SDRAM with advanced unbuffered ECC capabilities and optional interleaving (expandable up
to 4 GB)
Embedded NC7761 PCI 10/100/1000T Gigabit network adapter
Four Expansion Slots: Two PCI-X 64-bit/100MHz, One PCI 32-bit/33MHz slot, One PCI Express slot (X8 connector, x4
speed)
SCSI models include
Single Channel Ultra320 SCSI Adapter in PCI-X slot
SATA models include
Integrated four Channel SATA Controller
Four USB 2.0 ports - Two on front, two on rear
ROM Based Setup Utility (RBSU) and PXE support
Protected by HP Services including a one-year, Next Business Day limited global warranty - Certain restrictions and
exclusions apply.
QuickSpecs
HP ProLiant ML310 Generation 2
Overview
DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006
Page 1