HP (Hewlett-Packard) SCSI Welding System User Manual


 
System Unit
Dimensions
(HxWxD)
17.0 x 7-7/8 x 22 in (43.0 x 20.0 x 55.0 cm)
Weight
(approximate)
37 lb (16.8 kg)
Input Requirements
(per power supply)
Range Line Voltage
100-127V and 200-240V
Normal Line Voltage
115 to 230 VAC
Line Frequency
50 to 60 Hz
Rated Input Current
< 6A RMS at 90VAC with maximum load
BTU Rating
1,560 BTU
SCSI Connectors
(SCSI Models only)
One internal HD68 connectors
NOTE:
Support for either one internal or one external SCSI channel is
available. This is achieved using an internal to external SCSI cable
option kit (PN 159547-B22) and SCSI knockout bracket.
Power Supply Output
Power
Rated Steady-State
Power
350W
Maximum Peak Power
370W
Temperature Range
Operating
50° to 93° F (10° to 35° C)
Shipping
-40° to 150° F (-40° to 66° C)
Relative Humidity
(non-condensing)
Operating
20% to 80%
Non-operating
5% to 90%
Acoustic Noise
Idle
(Fixed Disk Drives
Spinning)
L
WAd (BELS)
5.7
L
pAm (dBA)
40
Operating
(Random Seeks to Fixed
Disks)
L
WAd (BELS)
5.7
L
pAm (dBA)
40
Non-Hot Plug Wide
Ultra320 SCSI Hard
Drives
36.4 GB 15K
Capacity
36419.2 MB
357012-B21
Height
1 in (2.54 cm)
Width
4 in (10.16 cm)
Interface
Ultra320 SCSI
Transfer Rate
Synchronous
(Maximum)
320 MB/s
Seek Time
(typical reads, including
settling)
Single Track
0.4 ms
Average
3.8 ms
Full-Stroke
8 ms
Rotational
15,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
71,132,000
Operating Temperature
50° to 95° F (10° to 35° C)
QuickSpecs
HP ProLiant ML310 Generation 2
Technical Specifications
DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006
Page 31