HP (Hewlett-Packard) SCSI Welding System User Manual


 
Hot Plug SAS
- (Hot Plug SATA/SAS Models Only)
Quantity
Supported
Position
Supported
Controller
36GB 3G SAS 15K
72GB 3G SAS 15K
146GB 3G SAS 15K
Up to 4
0, 1, 2, 3
Smart Array P600 Controller
NOTE:
Use of SAS hard drives in SATA/SAS models requires installation of the Smart Array P600.
Hot Plug Serial ATA
- (Hot Plug SATA/SAS Models Only)
Quantity
Supported
Position
Supported
Controller
80GB 1.5G SATA 7.2K
160GB 1.5G SATA 7.2K
250GB 1.5G SATA 7.2K
Up to 4
*
0, 1
Integrated four port SATA Controller
with RAID 0/1
Up to 2
*
0, 1, 2, 3
Integrated four port SATA Controller with RAID 0/1
Up to 4
0, 1, 2, 3
HP 6-port SATA RAID controller
*
NOTE:
A maximum of two hard drives are supported when integrated RAID is enabled. Use of hot plug SATA hard drives
in positions 2 and/or 3 requires either a non-RAID configuration or installation of the HP 6-port SATA RAID controller (P/N
372953-B21) and the HP 4-port SATA/SAS target fan cable (P/N 389653-B21).
NOTE:
Hot plug capability and drive LED status support requires installation of the HP 6-port SATA RAID controller.
Non-Hot Plug SATA
- (Non-Hot Plug SATA models only)
Quantity
Supported
Position
Supported
Controller
80GB 1.5G SATA 7.2K
160GB 1.5G SATA 7.2K
250GB 1.5G SATA 7.2K
Up to 2
*
0, 1
Integrated four port SATA Controller
Up to 4
*
0, 1, 2, 3
Integrated four port SATA Controller with RAID 0/1
Up to 4
*
0, 1, 2, 3
HP 6-port SATA RAID controller
*
NOTE:
A maximum of two hard drives are supported when integrated RAID is enabled. Use of non-hot plug SATA hard
drives in positions 2 and/or 3 requires either a non-RAID configuration or installation of the HP 6-port SATA RAID controller
(P/N 372953-B21) and two of the HP 2-port SATA/SAS cables (P/N 379093-B21).
NOTE:
Drive LED status support requires installation of the HP 6-port SATA RAID controller.
External Storage
Quantity
Supported
Position
Supported
Host Controller or Adapter
Modular Smart Array 30
Family
External
Smart Array 642 Controller
Maximum Storage Capacity
-
SATA Models
(SCSI Attached (Enclosure))
Internal
1.0TB (4 x 250GB)
External
29.40TB (14 x 300GB) x 7 (Requires additional SCSI controllers in slots)
Total
30.40TB
Maximum Storage Capacity
-
SCSI Models
(SCSI Attached (Enclosure))
Internal
1.2TB (4 x 300GB hot-plug hard drives)
External
29.40TB (14 x 300GB) x 7
Total
30.60TB
Tape Drives, Tape Autoloaders & Tape Libraries
QuickSpecs
HP ProLiant ML310 Generation 2
Storage
DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006
Page 28